You’ll find our electrical services enlightening!

The process of installing an electrical system in a building or other structure is referred to as electrical installation. This procedure normally consists of a number of processes, such as designing the system, installing wiring and other components, connecting the system to a power source, and testing the system to make sure it is operating as intended. To guarantee the safety and dependability of the system, local construction laws and electrical safety regulations must be followed when installing an electrical system. Electricity installations can be as basic as mounting a light fixture or as complex as wiring a whole structure. To ensure that electrical installations are completed safely and correctly, it is crucial to hire a qualified electrician.
A competent tradesperson with a focus on the installation, maintenance, and repair of electrical systems is an electrician. They work with a variety of wiring, circuits, transformers, and other electrical systems as well as other electrical equipment. Residential, commercial, and industrial settings are all common places for electricians to work.
Installing and repairing electrical wiring and circuits, troubleshooting electrical issues, installing and repairing electrical equipment, and making sure that electrical systems adhere to safety and legal requirements are some of the usual duties that electricians may complete.

Presently, Nepal’s electricity supply is primarily antiquated and unreliable. There is a pressing demand for electricians and other associated specialists who can assist in updating these resources because only about 76% of the population has access to basic electricity service there are frequently power interruptions due to Nepal’s unstable electricity service. Due to the requirement for maintenance and repairs of malfunctioning electrical systems, this has increased demand for qualified electricians. However, many places lack access to dependable power services because the infrastructure needed to change these problems is either inadequate or poor service.


1. Electricity surge or dips: Short-term changes in the mains power supply voltage are what both sags and surges are related to.

2. Flickering lights: If you notice flickering lights throughout your home, there may be a problem with the main connection or service cable connection.

3. Frequent light bulb blowouts: The reason of a blowout may be high voltage or a loose connection.

4. Warm and smelly (outlets or switches): Overload or damaged switch can be reason of smelly and warm outlets.

5. Tripping circuit breakers :Electrical overload, poor wiring, or a broken device are possible causes of this

6. Dead outlets: Circuit breaker might have turned off the electricity to your outlet if it had a short circuit or was overloaded.


• Electricity surge or dips:
Electrical surge and dip issues are resolved by Bhetayo’s electricians by locating the source of the problem and taking the necessary action to remedy it. An electrician from Bhetayo’s uses sophisticated tools to evaluate the electrical system and pinpoint the problem before replacing or repairing any damaged parts as necessary

• Flickering light:
The first thing Bhetayo’s electrician will probably do is make sure the electrical connections to the damaged lights are tight and secure. The electrician inspect the light switch to make sure it is operational and not the source of the flickering if the connections are secure. The electricity may not flow consistently if the connectors are slack, which could result in flickering. The electrician may then examine the wiring and electrical panel to find any probable problems that could be causing the flickering if the switch is not the problem.

• Frequent light bulb blowouts:
Frequent light bulb blowouts can be resolved by a Bhetayo’s electrician by first evaluating the circuit to find any flaws. The problem could be caused by a loose wire or old wiring. An expert electrician might advise installing a screw-in surge protector device to stop connected lights and devices from being harmed by power surges if nothing unusual is discovered. The experienced might even advise replacing all current bulbs with premium ones as doing so will considerably extend their lifespan. Last but not least, they might check to see whether the line is being overloaded with electricity, which could lead to excessive heat and blown lightbulbs.

• Warm and smelly (outlets or switches):
The Bhetayo’s electrician will investigate the source of the burning or odorous outlet first. In most cases, this entails looking closely at both cable connectors as well as any exposed or loose wiring that might be the source of an electrical overload at the outlet. The electrician will subsequently inspect other components such as outlets and plugs. To ensure appropriate operation, they may also test ground fault circuits if necessary. Repairs might range from changing a single wire connector to totally rewiring a wall outlet, depending on the inspection’s findings. This is done to securely transfer electricity from one source to another without putting further strain on the wiring systems.

• Tripping circuit breakers:
A circuit overload is the main reason why a circuit breaker trips. Each circuit is only designed to support a specific amount of electrical load, and if it does, the breaker will trip. The wiring would then be examined by the Bhetayo’s electrician for to make sure it was placed correctly and was unharmed. Also, they would look for any loose connections that might be the problem. The Bhetayo’s electrician will look for an overload. If an appliance is the root of the problem, the electrician will advise getting a new one.

• Dead outlets:
Bhetayo’s electricians investigate the cause of the power outage in order to fix a dead outlet. They begin by ensuring that all circuits are still correctly connected and that there is enough electricity flowing into the wall socket. They may need to utilize a voltage meter to find any current imbalances or outlets that are deficient in fully functional electrical components. Along with checking and replacing fuses as necessary, electricians can also fix loose wiring, replace broken switches, reset circuit breakers, repair GFCI (ground fault interrupter) outlets, check grounding wires, and inspect capacitors.